j30a4 into crx....need some help.

[LKSi]

Yeah it bolts to the pedals and an EK master cylinder is used. Check it out here. It mentions a little welding is needed.. that is already done on mine.

http://www.suja1motoring.com/product...px?productId=1

[StolenLegacy]

Originally Posted by LKSi

Yeah it bolts to the pedals and an EK master cylinder is used. Check it out here. It mentions a little welding is needed.. that is already done on mine.

http://www.suja1motoring.com/product...px?productId=1

Ooh ok man. How much you want for the complete kit? And that piece is alredy welded? Can u post some pics of it? Wh aren't you going o use it?
Thanks for the info!

[LKSi]

Originally Posted by StolenLegacy

Ooh ok man. How much you want for the complete kit? And that piece is alredy welded? Can u post some pics of it? Wh aren't you going o use it?
Thanks for the info!

PM'd

[RPM SYSTEMS]

Originally Posted by StolenLegacy

Can I use te eg axles from hasport for my ef? I asked on the exel forum but no one ever responded. Don, which ones did u use or the ef swaps that u have done and how much horsehpower can they handle? Thanks again.

Can I use te eg axles from hasport for my ef? yes , as long as your car is a SI or you put the 90 - 93 intrega spindles on the EF. i go with the interga setup , just for the bigger brakes.

how much horsehpower can they handle? if car ride is setup right the axle will hold a little over 300 hp

don
rpm systems

[StolenLegacy]

Thanks don!!! I apprciate the info! Yeah I have a 90 SI, and I was plannin on doing the 91 teggy conversion, Ive had the arms and rotors and suspension for a min now and am bout to swap it all over this weekend. 300 hp sounds reasonable. I'm waiting to see if Brian is coming out with some axels since he's almost done with the Ef mounts. And again, thanks Don for providing usefull info!!