auto to manual few questions

[talapx2]

i recently swap from auto to manual and i have a few questions car is running fine, just wants to clarify a bit.

do u put it on P park or N neutral ?
i put it on N neutral.

does limp mode mean your running in close loop or open loop ?
cuz i can only rev at 5000 rpm in N or P

does limp mode mean the engine is running rich all the time meaning consumes more gas than normal ?

anyway heres my setup
j32a2 motor and ecu automatic 03 cl type s
j32a3 tranny 6 speed with lsd from 04 tl

thanks

[Tillotson 09]

you may read up under the vendors section. RPM systems has a write up on ecu's. i dont think you can make that ecu work properly. i would call over there and speak with Don.

[1diesel2hondas]

You need to spend around $400 on sensors to convert the engine to a manual, and run a manual ecu. Or look into an expensive engine management systems. There are more specific details in other threads.

[talapx2]

thanks for your suggestions

but u did not really answer my questions, dont get me wrong i appreciate all your input in this ..

thanks