j35a1

[junior78]

has anyone done the j35 swap in eg chasis i know tim beadle knows alot but he is a really busy guy... im just curious to know what else i need so far i have my engine J35A1 mounts, axles, auto ecu, 2006 tl s tranny, chasebays is gonna cover my wires and im gonna run stock TL clutch and flywheel for now am i missing any thing do i have to mod the engine in any way

[Becoming]

Search it...it's all over the site and internet in general.

[junior78]

i did search i find everything on j32 nothing really on j35 but thanks for your help

[wolydotmatrix]

The J32 and J35 are pretty much the same. Just like other Honda/Acura engines just about everything will interchange and or bolt up with few or no mods.

[Becoming]

The difference in displacement is that the 3.5 have a 7mm longer stroke on the crank. And the heads have smaller diameter valves{Some are 35mm down to as small as 32mm depending on the particular engine}, and most do not have as much lift on the cams as the CL-S cams do...

Check here for some general info> http://en.wikipedia.org/wiki/Honda_J_engine