b-series throttle bodies?

[changaroo]

ive read some people have had success getting these to work...

are there any modifications that need to be done? or is it a straight bolt on and go kinda deal?

thanks

[junior78]

ive read some people have had success getting these to work...

are there any modifications that need to be done? or is it a straight bolt on and go kinda deal?

thanks

they bolt right up but you have to modify the iacv if you want it to still work properly or you can just have it plugged in and zip tied somewhere and not connected to coolant lines

[changaroo]

will the idle be all whack if its not connected to the TB and left dangling?

[RPM SYSTEMS]

http://i733.photobucket.com/albums/ww337/danjerusmoke/iacvadapter.jpg

i made this peice out of plat aluminum and two 1/4 barb fittings with 1/8 npt threads. after bolting it together . on side goes to to the intake pipe . other side went to a hole we drilled and taped under the throttle body neck . and we used a blox's 70 mm throttle body.

don
rpm systems

[junior78]

will the idle be all whack if its not connected to the TB and left dangling?

no the idle will be fine but cold starts might be difficult

[changaroo]

http://i733.photobucket.com/albums/ww337/danjerusmoke/iacvadapter.jpg

i made this peice out of plat aluminum and two 1/4 barb fittings with 1/8 npt threads. after bolting it together . on side goes to to the intake pipe . other side went to a hole we drilled and taped under the throttle body neck . and we used a blox's 70 mm throttle body.

don
rpm systems


thanks don, i remember seeing you post this but i couldnt find it again.

are there any actual pics of this piece? its kind of hard for me to visualize where this all goes.

how hard was it to fab something like this?

[changaroo]

boing. still kinda confused as to where that plate goes exactly. anyone have pictures?

[RPM SYSTEMS]

if you remove the IACV valve that is where the plate bolts on to.

don
rpm systems

[reese889]

Can anyone elaborate a little more on this. I was thinking of using a blox 76mm b series throttle body .If i put this IACV adaptor plate on would there be any problems after that like the idle?

[RPM SYSTEMS]

have you open up ht intake manifold , by port matching the rudders tubes and moded the intake juges?

[reese889]

I have not bought the throttle body yet. If I do get it I would for sure port match the manifold to the throttle body. Im trying to see if it would be worth getting, by not having any problems with it.

[whitltng]

have you open up ht intake manifold , by port matching the rudders tubes and moded the intake juges?

hey don can u go bigger on the tb....or did u just want to run the 70....