full parts list needed

[radracing99]

hey guys I was wondering If anyone could give me a full parts list of what im going to need to do a j into my eg hatch. I hardly ever get on the net so I get frustrated searching around...I twist wrenches not play on my apple lol..so If someone is willing to help that would be RAD!

thanks paul

[Becoming]

Engine- Just about any J engine
Transmission- 03 CL-S, 04-08 TL, or 03-08 Accord{not sure on years exactly}
ECU- Can use auto or manual
Shift box and cables- Use the one specified for the trans you get
Axels- EVS-ONE or DSS
Mounts- Hasprot or make you own
Wiring harness- Depends on ECU that you use
Flywheel- 03 CL-S, 04-08 TL, or 03-08 Accord{If you use an 03 CL-S ECU, you will need the corresponding flywheel due to it's the only one with the crank triggers on it}
Wiring- Don @ RPM Systems is very good with this swap already

[radracing99]

thanks man thast just whhat I was lookin for!!! now I can start searching for parts as i study the swap!!

[hondaboy4life]

Paul like i said whatever longblock you get just get the same harness and then a matching ecu from '03-'05. It will save you a bunch of headaches later on.

[240_Sergio]

what t bracket is used ?

[jtrix21]

what t bracket is used ?

Haven't you received the Hasport mounts already? There is no T bracket in addition...

[Screech`:)]

Now I got my parts list together (haven't done the swap yet) and it came to be about $4500 over estimating alittle. Would this be about right judging from yaws experience?

[wolydotmatrix]

Now I got my parts list together (haven't done the swap yet) and it came to be about $4500 over estimating alittle. Would this be about right judging from yaws experience?

That sounds about right.

[Atlas.46]

i was looking for one of these threads. Glad i found it.