axles??

[rafybuilt]

I was wondering what axles every one uses for doing this swap into a 92-95 civic

[hondaboy4life]

Driveshaftshop
Evs-one remachined oem
hasport


pick and choose ;)

[rafybuilt]

Noones has tried a oem combo yet??

[Evan]

I've made some with OEM combos....it's just hard and annoying buying so many used OEM axles in good shape. I will NOT piece together using aftermarket axles(EMPI, Napa, etc).

[rafybuilt]

would you share which ones you used??

[starboy869]

Once I find the right combo with my swap I will post them up.

[acidbath124]

awesome this is the one thing nobody really wants to give information on .ive tried buying axles from people for the last week and nobody i have talked to will sell them to me.you would think with the economy the way it is people wouldnt be scared of making a little money

[Becoming]

awesome this is the one thing nobody really wants to give information on .ive tried buying axles from people for the last week and nobody i have talked to will sell them to me.you would think with the economy the way it is people wouldnt be scared of making a little money

They heard your shit's counterfeit.

[hondaboy4life]

can't afford Driveshaftshop?

[rafybuilt]

no but you know axles break. and i like oem combos. cause i can just go to the store and pick up a brand new one or go to junkyard and have one right there on the spot

[hondaboy4life]

I hear ya. Was just wondering because i have thought about getting a group buy together or something for DSS axles. They just redesigned their j-series ones.

[acidbath124]

i didnt actually try driveshaft shop i tried two different places that supossedly their axles would hold up pretty well but i made ample effort to try and buy their axles and they blew me off so im not going to beg somebody to take my money.im goin to make my own at some point but i dont have time to do it before IA cuz we have too much other stuff to do to get done but we did get it running a couple of days ago which was a big step

[wolydotmatrix]

My Hasports have not failed yet, 200 miles spirited driving with limited traction. I only know of a few failures of these axles and when they broke it was on purpose. Something about 7k in the burnout box with slicks. When the slicks started to grab, the clutch was side-stepped and the throttle was not lifted. Just saying, I don't plan on driving under these conditions. But anything is possible,

[rafybuilt]

ill be doin a swap in a couple weeks. if noone posts anything up. im trying ep3 outers,shafts, and cl inners

[hondaboy4life]

good luck! I'm trying to see if the rsx box will work so i can use hybrid racings new bolt in box!

[tegman88]

the price on the hasports were under 400 for us and ive been beating the piss out of them all day 2 gear starts at 6k is fun so is 3rd at 5k and these were from a dead stop cause first is useless to me earlier i hit it in 3rd at about 30mph and it broke loose

[starboy869]

ill be doin a swap in a couple weeks. if noone posts anything up. im trying ep3 outers,shafts, and cl inners

Would that combo be the correct length?

[Hakd.Inc]

I am going a different route, well at least i am working on the combo to use, I am getting the 5 lug conversion, and from a glance the look mostly the same, so therefor i am getting the Ctr look, Bigger brakes, rear disc conversion, and the use of stock axels from the accord type s... Has anyone looked into this, and is it even possible?

[smokinloc]

i was just wondering for the people running the hasport axles, r u running the level one or level 2 axles? i wanna do a j32 swap , pretty stock aside from intake and exhaust and i was wondering if the level one axles will be good enough for it?

[wolydotmatrix]

i was just wondering for the people running the hasport axles, r u running the level one or level 2 axles? i wanna do a j32 swap , pretty stock aside from intake and exhaust and i was wondering if the level one axles will be good enough for it?

I am running the level one axles.

[RPM SYSTEMS]

we have used the j-swap axles from dss/hasport and we have made our own , and i can say they will hold a little over the 300 hp mark .

don
rpm systems

[jesus]

I got the answer for everyones problems

Ok driver side u gotta use the j series shafts then use inner and outter accord shells same thing with the passenger side but use a passenger side j shaft