speedo not working

[Andreww]

any suggestions? and also my car will not pass 4800k for some reason is that limp mode? im running a j32a2 with 03 accord tranny and tl base ecu

[heyy]

any suggestions? and also my car will not pass 4800k for some reason is that limp mode? im running a j32a2 with 03 accord tranny and tl base ecu

There are a couple things that effect vtec and limp mode..(car speed, engine speed, colant temp, and oil pressure) if any of these are not correct u will be in limp mode.. google is your friend but..on that note check ur ecu some ecus have the 24 pin and some have 22 pin.. if you search ecu on here you will find a thread that talks about which ones will read speed and rpm correctly from trans to ecu(rpmsystems post)...if ur good on that then u need to check the coolant temp sensor, oil level(sounds dumb, but check it), oil pressure...

whats the idle like?

[RPM SYSTEMS]

the speed sensors are backwards or the ecu does not know it is in drive. the ecu thinks it is in park and does not see the gear select or the speed sensors. is the mph working on the dash or thought the DLC port?

don
rpm systems

[Andreww]

i have both the tl base and tl-s i switch it many times to see but still none of them seems to work

[RPM SYSTEMS]

is the vssout from the ecu going to the input to the of the wire to the cluster?