CKP 2 problem

[gigo]

OK i got a j32a2 wit a accord manuel tranny and manuel 03 cl harness and ecu. I also changed the cam and the crank and the sensors thanks to rpm system showing the difference between the auto and manuel motors. The problem i have now is that since i have a accord tranny there isnt a second crank sensor slot on the tranny, so now i get it to start but it goes into limp mode and doesnt let me pass 2k. i tried to by pass it by using the one from the crank but no luck and the code was still there.

So i was wondering if anyone has went through this allready and found a solution of fixing that without having to change the tranny.

[wolydotmatrix]

You could just change the clutch housing. Get one for the 03 CL-S 6 spd and swap it out and the sensor hole will be there.

Option 2 would be to make your own sensor mounting location in your current
clutch housing. Doable but would not suggest it.

Housing is about $250.

[gigo]

the housing is 250 from dealer or thats just a rough estimate.