My J32A2 Civic

[Evs-One]

Here's some older pics. A lot has changed since these ;)
Although I didn't build the car for drag racing, launching on slicks can tell you a lot about the setup and how strong everything is.
Engine is Bone stock(manifolds, ect), just a 3" intake with K&N filter, and 2 1/4 exhaust with test pipe. Runs 12.7@107 on a crappy track and puts down 240/220

http://i263.photobucket.com/albums/ii121/Evs-One/engine2.jpg

Ground clearance...car is pretty low too
http://i263.photobucket.com/albums/ii121/Evs-One/clearance-1.jpg

Will have more pics soon.

http://www.360imports.net/photos/dyno.jpg

[hondaboy4life]

Welcome. Keep us updated on things. You should throw together some in car footage of the car going down the street. :)

[wolydotmatrix]

Nice build, have been following on other forums. might need to get some axles from you when my Hasports break ;D

[civicdrivr]

Nice numbers. If you can pick up a set of headers you'll really open the engine up. Also, I think you'd benefit from a 2.5" exhaust instead of the 2.25".

[kulrevon]

On the CL's some people have found nice gains with a 3" with the j35's.

[Evs-One]

Headers will be here this week. I've had my 3" exhaust parts(cat, resonator, muffler) here forever...just been too lazy to order some headers. Went with some cheap ones off ebay- should be better than stock manifolds!

[Becoming]

Headers will be here this week. I've had my 3" exhaust parts(cat, resonator, muffler) here forever...just been too lazy to order some headers. Went with some cheap ones off ebay- should be better than stock manifolds!


Acidbath got those Ebay ones....Will need some porting on the flange to not hinder flow, the flange is too small to correctly mate up to the head.

[wolydotmatrix]

I got lucky and found these for $200 at a local salvage yard
http://i350.photobucket.com/albums/q413/wolydotmatrix/IMG_3814.jpg
http://i350.photobucket.com/albums/q413/wolydotmatrix/IMG_3662.jpg
I believe they retail for more than $600.
might be a good idea to look around first.

[civicdrivr]

Yea, much more then $600. They go for around $1100. Nice buy. What car did they come out of and what does the rear header look like?

[wolydotmatrix]

These came from a J30 Accord...Same part #

Eve, when are you getting your exhaust done??? I would like to take a look at both sets of Dyno numbers to get a comparison between the different setups.

don't want to jack your thread, sorry in advance

[Evs-One]

You're not thread jacking... ;)

As soon as my headers come on, I'm going to do the exhaust and intake.
maxbore.com gave me a bored throttle body. That, plus some intake plenum work, headers, and exhaust work, I'll go dyno and compare both dyno charts :)

[hondaboy4life]

can't wait to see the results!