Please dont laugh at me ..i just want to learn ...

[drcivc]

QUOTE FROM K20A.ORG

i have a 02 j32a2 motor with a 03 accord trans with reciepts, hasport mounts, brand new accord shifter box with cables, cl-s ecu, j32a2 auto harness. you need clutch, flywheel, starter, axles for it to be a full swap

whats that the j32a2 auto harness and the flywheel???

[Becoming]

You can modify the J engine harness for an automatic to work with the swap into a Civic, and the flywheel is what you bolt your clutch to ;)

[drcivc]

so if my engine was originally an automatic...J35A4 from honda odyssey with tranny 6sp honda accord
will i need to modify the harness and the ecu will be from the honda odyssey or the honda accord still automatic..

[drcivc]

hey guys help me out with this what do i need to do to make the accord transmissionfit on the odyssey engine?

[Becoming]

so if my engine was originally an automatic...J35A4 from honda odyssey with tranny 6sp honda accord
will i need to modify the harness and the ecu will be from the honda odyssey or the honda accord still automatic..



I meant you will have to modify it to work into your Civic.

[Becoming]

hey guys help me out with this what do i need to do to make the accord transmissionfit on the odyssey engine?


Bolt it together once you get a flywheel and clutch....No modification needed.

[drcivc]

ok great so it will only have to be fit on the crank shaft,..

[drcivc]

i should get the flywheel and clutch for the honda accord ??

[wolydotmatrix]

If your using the ODY computer then yes the Accord clutch kit and flywheel will work fine. Don't forget to get the flywheel bolts and pressure plate bolts as well. Not the same as the ones on your ODY engine.