View Full Version : BLOX 76mm Throttle Body Issues
02-25-2010, 05:38 PM
I purchased and installed a blox 76mm B-series tb for my 03 acura cls 6speed. calibrated the tps position to read .5 volts at idle. i can go to redline at partial throttle with no problems. now if i go to redline at WOT then it will throw a tps code and cut fuel early at 5krpm. what can it be? ive replaced the tps, and the ecu still same issue. I was under the assumption that this TB works ( I saw a thread from rpm systems saying so), so any help would be great!
03-01-2010, 07:42 AM
i thought the type s throthle bodies are 76mm
03-01-2010, 02:54 PM
pretty sure CL-S throttle bodies are 68mm...
03-01-2010, 05:18 PM
you only calibrated the throttle body at closed throttle right
03-01-2010, 06:43 PM
Have corrected the problem. the tps was bad. the shop that installed it switched out my good one for a bad tps ( i dont think they meant it) and now its all well and done.
03-01-2010, 06:53 PM
dont you hate when shops do that lol bastards so do you feel the difference with a 76mm throttle body?
vBulletin® v3.8.4, Copyright ©2000-2014, Jelsoft Enterprises Ltd.