PDA

View Full Version : OBD2B= Plug and play with J???

LKSi
01-21-2010, 12:28 AM
Sat down to get started on my conversion harness tonight... started looking at the diagrams and it is almost all the same.

J32A2 wiring
http://i1023.photobucket.com/albums/af356/LKSi89/j32wires.jpg

Integra OBD2 wiring
http://i1023.photobucket.com/albums/af356/LKSi89/integrawires.jpg

Looks almost plug and play to me... I see I'll have to change the pin for the secondary 02, but that looks to be about it. Any input??
LKSi
01-21-2010, 03:04 PM
Looking at this again.. I'll have to change a few pins and it should work! The Integra A plug plugs right into the TL-S ecu. I'm getting to work on the shock tower plugs later tonight.
RPM SYSTEMS
01-21-2010, 06:34 PM
it looks like your on the right road. just dont use the type-s auto ecu ,use the non - type-s. or you car will go in limp mode. you still have the green plug on the drivers kick as well. hint hint.

don
rpm systems
LKSi
01-21-2010, 07:12 PM
it looks like your on the right road. just dont use the type-s auto ecu ,use the non - type-s. or you car will go in limp mode. you still have the green plug on the drivers kick as well. hint hint.

don
rpm systems

Will the non Type-S still engage vtec and everything? Right now I'm working with a PGE-A58.
RPM SYSTEMS
01-21-2010, 09:15 PM
no because the type-s looks for stuff that wont work without it being auto, for right now working on problem. do not throw ecu away. just use a P8E from a 02-03 cl or tl.

don
rpm systems
LKSi
01-21-2010, 09:17 PM
Thanks for the help.
Chibi
03-02-2010, 12:30 PM
that's something to learn...can you use a odyssey ecu and not go into limp mode?