What ECU will work for you and the numbers

[RPM SYSTEMS]

:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:( :(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(:(

[wolydotmatrix]

Good info Don. thanks for your time.

[RMXmitch]

any experience or information about this ecu Don?
http://i935.photobucket.com/albums/ad199/rmxmiotch/DSC02869.jpg

its got a 22pin small plug.. I'm told its an 02-03 tl-s ecu.

[wolydotmatrix]

http://www.acuraoemparts.com/delray/jsp/prddisplay.jsp?inputstate=5&catcgry1=TL&catcgry2=2002&catcgry3=4DR+TYPE-S+NAVI&catcgry5=CONTROL%2BUNIT%2B(CABIN%2BROOM)%2B%2B(TYP E-S)&ListAll=All&vinsrch=no


Looks like an 02 TL.

[xero_xero]

props.

[RMXmitch]

http://www.acuraoemparts.com/delray/jsp/prddisplay.jsp?inputstate=5&catcgry1=TL&catcgry2=2002&catcgry3=4DR+TYPE-S+NAVI&catcgry5=CONTROL%2BUNIT%2B(CABIN%2BROOM)%2B%2B(TYP E-S)&ListAll=All&vinsrch=no


Looks like an 02 TL.


Thanks!

[Chibi]

can you use the 2004+ acura tL ecu? for the 2002 harness?

[acidbath124]

i believe the 04+ ecus are drive by wire which you probably wana stay away from

[Chibi]

i believe the 04+ ecus are drive by wire which you probably wana stay away from


ok, but just wondering...if i use a 2002 tL base model ecu, would that raise my rev limit higher than 5800?

[mhassett]

ok, but just wondering...if i use a 2002 tL base model ecu, would that raise my rev limit higher than 5800?

Im using a 02 base TL ecu. I am getting a 5800 rev limit also. Running 02 J35 with 02 TL auto trans. Only codes are ELD and O2 sensors... Please PM me if you figure anything out...

[hondaboy4life]

5800 is limp mode/park... i'd ask the accord/tl guys what they rev to to see what you should be revving to.

[Chibi]

my buddy's 2006 honda accord rev up to 6800

[JCharged]

Mine will go to about 7200 via Richie's module harness. P8E 2000 TL.

[Chibi]

Mine will go to about 7200 via Richie's module harness. P8E 2000 TL.


what does the module harness help with?

[hondaboy4life]

It eliminates all auto tranny codes my emulating a automatic tranny to the ecu.

[Chibi]

Mine will go to about 7200 via Richie's module harness. P8E 2000 TL.


did richie ever figure out how to make that harness work with 02 tL-S auto harness?

[j32a2project]

Just an FYI the P8F 99-00 Odyssey ecm's Do not have 12 or 22 pin connectors. I have been to 4 salvage yards and pulled them from base and EX Models. Neither have the connectors, If you use this computer, Your speedo wont work.

[jswappedsedan]

So I get the 12 plug 22 plug part but I'm a little confused so I hear that u can make the 02 cl type s auto ecu work with the manual swap but then I hear that it goes in limp mode if it don't see the auto shifter please clear this up for me thanks..... I have a 99 tl ecu and a 02 cl type s ecu both auto

[j32a2project]

Im pretty sure If you have a manual Motor you need to run the ECU for that motor. If you have an auto motor you need to get one of the auto ecu's,P8E, out of something that doesnt have the tiptronic trans. What motor Do you have?

[jswappedsedan]

i got my ecu motor and harness from an auto cl type s and the ecu code is37820-PGE-A57 and it says earlier in this thread that ecu is 6 speed manual can some one explain what i got and it has the 22 pins on back check pic

[JWagon]

37820-PGE-A62RM
'03 TL Type-S AT 4DR
'03 CL Sport AT 2DR

37820-PGE-325RM
'02 3.2TL Type-S

37820-PGE-315RM
'01 3.2CL 2dr AT

37820-PGE-A53
'01-'02 CL Base

I have these ECU's at the moment. Can anyone tell me if these are correct?

[JWagon]

jswappedsedan 37820-PGE-A57 auto / 37820-PGE-A11/A12 manual

JWagon the ecu info is correct.

Thanks for the help!

[KhanhCord]

is the 04 odyssey ecu differ from 03? i thought 04 engine was same as 03..?