who makes your pistons and rods???

[Singlecam_eg]

Has anyone found companys that actually produce pistons or rods for the J motors yet? I kno KMS makes pistons for the V6 accord which is the same bore size. And even if you need custom pistons they have all the specs on hand you just need to specify bore size, valve size and comp ration and they should be able to do the rest from wat they have there. But I haven't found a company that makes a set of rods yet.

[Rajca]

would like to know also.

[da1cc]

http://www.nolimitmotorsport.com/prod/HON-220-580-1618F

[Rajca]

nice. added on my list

[j35j32TTurboEk]

eagle makes h beams rods for the j32a2 part number 5630j3d 400 bucks retail

[j35j32TTurboEk]

and kms dosnt have l/c pistions in a 89mm bore they make 8.8:1..89.5mm bore but who wants to bore it out cylinder walls already think enough unless u do sleaves.. weisco will make you them 6 weeks it takes and u gotta send out ur pistions 900 bucks also je same thing 3-4weeks to make it 1100 bucks..im in the process my self

[Rajca]

$400 for a set (6)? Or each?

Also what is the difference between h and I rods? What are the pros and cons of each?

Their was a member on another site that used the kms accord pistons on his j32a2 and dint bore the sleeves. U sure thair 89.5?

[wolydotmatrix]

$400 for a set (6)? Or each?

Also what is the difference between h and I rods? What are the pros and cons of each?

Their was a member on another site that used the kms accord pistons on his j32a2 and dint bore the sleeves. U sure thair 89.5?

2 very good questions. I would like to know as well.

[Rajca]

what i found from eagle
http://www.eaglerod.com/index.php?option=com_content&task=view&id=21&Itemid=32

so $400 for 4 rods, u would have to buy two sets, $800 or split the last set in half, so about $600.


but WE can for SURE use the H22 rods????????????:confused:

[j35j32TTurboEk]

i called kms myself and they said they only had low compression in 89.5..and i called eagle my self and they gave me a price of 400 for 6 im not sure if he gave me cost bc i work at a shop and were dirrect with them or not but there just h beam rods no powderd..im goin straight threw to weisco for there pistions with rings for 1000 for 6

[j35j32TTurboEk]

h beam rods are alot stronger design than i beans they have more mass to them then a i beam..but some motors cant fit a h beam rod so they have to use a i beam..j motors can use a h beam though..

[Rajca]

part number for the weisco pistons or are they custom? forged?

[Rajca]

and $400 for 6 im game. if u want i can payapl u money and u can get them. but it said on their website $400 for 4, so im confused now

[wolydotmatrix]

Sounds like 2 people are going to have to go in and buy 3 sets and split it.

[emilio]

h22 rods are 22mm pin 51mm big end and 143mm c2c lenght j32a2 rods are 22mm pin 58mm big end and 161.8 c2c length if you use h22 u will have to get the crank cut and u will decrease rod stroke Ratio:eek:

[Redd]

K1 technologies will make a custom rod for the J-series. I called eagle first and they said that they do not make custom rods for it. K1 for a 12:5:1 set up is asking $860 which includes ARP2000 rod bolts. JE pistons said they would be $170 each. Just to give you guys an idea.

[Rajca]

i want a rod that lowers compression ratio. or a stock forged rod will do.

[Redd]

i want a rod that lowers compression ratio. or a stock forged rod will do.

Well call K1, I had a buddy who builds camaro's recommend them to be a very reliable rod. JE is always a great piston. Im sure JE and K1 will be around the same price regardless of C/R due to it being a custom job.

[Rajca]

never heard of k1. they got a website?