Which Alternator Belt to Use

[JS_MUGEN_TL]

hey just wanting to no what kind of belt you guys are using that have no power stearing or ac, and if you guys are using the tensioner or just running it straight to the alternater to the crank. thanks, I already know what radiator you guys are using just need to know the belt. I know its a gaterback 4060..... just need the other numbers

[hondaboy4life]

Goodyear Gatorback 4060420 (6PK 1065)

That's being run with the tensioner. No AC, No PS. Stock location.

[JS_MUGEN_TL]

Goodyear Gatorback 4060420 (6PK 1065)

That's being run with the tensioner. No AC, No PS. Stock location.

yea finally got the other numbers off you thanks man.

[junior78]

yea finally got the other numbers off you thanks man.

the funny thing is this belt is to big for my swap i had to shrink it down about 3 inches
i have the j35a4 from a 2002 odyssey my engine uses a different tensioner \
the belt i had to use was a Prestone 390k6

[jswappedsedan]

someone needs to make a better looking tensioner one that has a bolt to tension the belt that would be great at least for the j32a2 not sure about other J-Series

[wolydotmatrix]

I like the newer style tensioner which uses the a shock style dampner. May be a direct fit to the older blocks. might be able just switch te AC mounting bracket. Will try to lok into this, because the older spring tensioners have a tendency to fail with higher mileage.

[JaysS01]

What belt are people using with the Hasport alt bracket? 4060420 is to long

[bombcitydavid]

I HAVE THE Hasport bracket i would also like to know.

[hondaboy4life]

4060420 is only intended for use on alternators being placed in the stock location minus AC and PS pulleys.

[bombcitydavid]

i just checked goodyear site a 4060420 6pk 1065 is 42 in a 4060415 6pk 1055 is 41.5 in and the 4060410 6pk 1040 is 41 in. maybe that will help

[teh CL]

I just installed my UR crank pulley & the belt that I got with it (bought used) is too big since I'm not using A/C, so what size belt should I be lookin for? & also which size PS belt?

I've searched but I'm not 100% on what I need..

Thanks guys..

[xohcef]

Just so the info is here, from what I've read all you do with the hasport alternator bracket is just use the a/c belt.

[JdmJryDB8]

Just for the record I running2004 j35a4 with no ac/ps with 420k6 belt from autozone. It's a 42 inch belt

[JdmJryDB8]

For the record...... When going with a smaller underdrive pulley as a EBAY Bomz or Option racing lightweight pulley with out p/s and a/c I used a 390K6 belt from Autozone.