J swap into 96 Coupe

[jason.az1]

Okay I have a 96 coupe. I been considering swapping over to a v6.
I've had B's and D's before and I've driven K swapped eg's/em2's
I can really careless about the hp/tq part of this swap,
It would be more for me wanting to have something I don't see
at every meet/show in AZ.
Only V6 swapped Honda's Ive seen in
AZ is Tri-Tech motorsports and there badass
and really cool dudes at that shop!


Now as for the swap I know I need
the Basic stuff like

-Motor J32a2.
-6-speed manual CL transmission.
-2003 CL ecu (6 speed).
-Hasport Mounts EKJ1.
-Hasport J-Series Axles Level 1.
-Oem Header's
-Custom Header back exhaust/muffler.
-Intake.
-Cutting the passenger oem mount off.
-Cutting a hole in my hood or no hood at all or custom hood.
-All necessary parts (alternator,sensors etc...)
-Longer fuel line from filter to rail
-Fuel pump Walbro 255
-Steel braided clutch line
-Shifterbox all the same
-Shifter cables all the same
-Engine harness/cabin Custom made
-MPH/RPM converted box RPM systems
-Throttle cable stock

Am I missing anything?


Thank you guy's for all the help
Ill be reading and posting up on the forum soon enough
thanks again

[jtrix21]

correct lots of info is available on this site.

The speedo correct, the tach correct (rpm sytems) info included.

[jason.az1]

as your a new guy .....THERE IS 90% OF EVERYTHING YOU NEED TO KNOW ON THIS SITE .
READ AND YOU WILL LEARN .

this is been a service announcement is brought to you by RPM SYSTEMS
correct lots of info is available on this site.

The speedo correct, the tach correct (rpm sytems) info included.




Thanks guy's Im still looking threw
the site/H-t/K20a/Nwp for swap info but

Im just not sure about this
-Harness
-Cable's and Shifterbox
-Throttle cable?

[townsy859]

Thanks guy's Im still looking threw
the site/H-t/K20a/Nwp for swap info but

Im just not sure about this
-Harness
-Cable's and Shifterbox
-Throttle cable?

You've obviously been looking too hard in the wrong places. Like RPM said 90% of it is already on here. There's even a cool mod in here for using HR shiftboxes. Just look!

[jason.az1]

You've obviously been looking too hard in the wrong places. Like RPM said 90% of it is already on here. There's even a cool mod in here for using HR shiftboxes. Just look!

I been looking but most of the stuff I've found is people like me asking questions and people telling them to search or people saying v6 is a waste go K
and just alot of not clear info.....
some one PM me with a few helpful information so im going to be doing some more reading

[jason.az1]

Found all the info I needed

[hondaboy4life]

anymore questions feel free to pm me.

[acidbath124]

personally i would recomend going with the hybrid racing k series shift box its awesome and you can use cl s shift cables. if you have an engine out of a manual use a manual harness and ecu if you have one out of an automatic car use the auto harness and ecu and i would recomend getting DON at RPM SYSTEMS to make you the two jumper harnesses hes awesome oh and i think i used a d series throttle cable

[jason.az1]

anymore questions feel free to pm me.
will do thanks man

personally i would recomend going with the hybrid racing k series shift box its awesome and you can use cl s shift cables. if you have an engine out of a manual use a manual harness and ecu if you have one out of an automatic car use the auto harness and ecu and i would recomend getting DON at RPM SYSTEMS to make you the two jumper harnesses hes awesome oh and i think i used a d series throttle cable

isnt all the cables the same? same goes with the shiftet box?
and thanks for the info :thumbup:

[jtrix21]

i would imagine there are cables of different length. The shifter boxes should work regardless of which cables you use.

[jason.az1]

i would imagine there are cables of different length. The shifter boxes should work regardless of which cables you use.

Oh I thought there all the same just like how all B's are the same and just like how K's are the same....


Cant wait to start buying everything for the build :cool:

[jtrix21]

Oh I thought there all the same just like how all B's are the same and just like how K's are the same....


Cant wait to start buying everything for the build :cool:

Well not all B series linkages are the same, though. Goodluck with it though.

[jason.az1]

Well not all B series linkages are the same, though. Goodluck with it though.

Thanks,

[project4dr-eg]

Any updates?

[civicking]

i was under the impression that an 03-05 accord shifter box and cable would work perfect you just need to buy the mounting plate so it sits in the stock position.