PDA

View Full Version : J30A Pin out diagram


jetboater
11-29-2009, 09:55 PM
I am after the pinout diagram for the engine ECU for a J30A whici is out of a 1996 oddessy. I am puting the engine into a Jetboat so I only need the engine management ECU pinouts no need for the auto ecu.

Thanks

jetboater
12-01-2009, 10:37 PM
Unfortunatly the wiring harness has been cut and we don't have a section of it so we need the pinouts to rewire the harness. Basically we have the engine with the plugs all over it and the ECU with the plugs and about 4 inches of harness. The ECU has a part # on the side of it 37820-P8B-J51

thanks

jetboater
12-02-2009, 01:21 AM
yes it is a dizzy and wire setup but Unfortunatly the wiring harness has been cut and we don't have a section of it so we need the pinouts to rewire the harness. Basically we have the engine with the plugs all over it and the ECU with the plugs and about 4 inches of harness. The ECU has a part # on the side of it 37820-P8B-J51

thanks