03 cl 3.2l type s swap in to a 03 v6 accord coupe 6 speed wireing ptoblem

[tchris222]

I need to know if the swap is a plug and play I have the 3.2 engine harness and trans harness and ecu will it plug in to the body harness of the accord they are both 2003 if they will not do they make a jumper for this or what has already been done by somebody else to complete this swap thanks for your time

[RPM SYSTEMS]

which type-s are you talking about the manual or trip-tronic? i think you are talking about the trip-troinc setup. the wiring is 90% there . there is some wiring that will have to be done to make the car drivable . if you plug in all the stuff you have know the car will start , if the immobilizer has been taken care of. but the car will not drive proper if the last 10% of the wiring and shifter mods are not done.

[wolydotmatrix]

yes and no, the 2003 Accord V6 is DBW(drive by wire) throttle. 2003 Acura is cable. Some sensors are located in different places between the two and I believe the computer connectors are different as well.

[tchris222]

It is a 6 speed car and I think the computer plugs are the same I have the engine harness off it the type s in the car its just not plugging in to the body harness it is a friends car that somebody has been working on for 2 yrs now and I am going to pick it up on Monday to finish it I have seen the done I just have not done one my self do u know if there is any adapters for the engine harness to connect to the car that I can get

[tchris222]

Somebody told me that rywire makes some but its not on the web site