PDA

View Full Version : Wassup j32, Need help with a head build

RAvi621
08-10-2009, 10:21 PM
This is my first post on this forum.

anyway enough with the intro's, i have a 03 CLS 6spd with bent valves in the front head anyone know where i can get or do they even make performance valves, springs, retainers for this motor. i did a lot of research and not coming up with anything. The only thing i found was skunk 2 titainium retainers for 180 for the set but i dont even know if it is letgit. Does any one know if these springs or valves are interchangeable with the NSX head parts or maybe a B,H,K series motor

As for the head i spoke with a reputable place here in NYC (westchester crank) and they told me 200 to do the head over with my parts and 600 to port and polish.

here is the link

http://www.sciontist.com/ProductDetail.aspx?id=100025193

If anyone got some info let me now. oh by the way the car is supercharged and untuned. i bent the valves by acting stupid and doing burnout's, but it was worth it the tire marks were a block long, 1st 2nd and 3rd gear spin.

Here is a pic of the motor and car
http://i26.tinypic.com/jt9ac6.jpg[/
http://i31.tinypic.com/rm21le.jpg
acidbath124
08-11-2009, 07:46 AM
i havent really looked too much into it but the d series springs might work.the specs seemed similar in the books so that may be something you cud look into. i just havent had time to really check it.if you figure anything out with it let me know
aztecracer
08-11-2009, 12:20 PM
Check with KMS, they have a head package deal for the j-series.
www.honda-performance.com
RAvi621
08-11-2009, 09:26 PM
Check with KMS, they have a head package deal for the j-series.
www.honda-performance.com

wow. thanks. exactly what i needed. i called and they have a complete head package for the J32 for $799, its a little on the expenensive side but they have it. Thanks again
Schu
08-12-2009, 12:14 PM
wow. thanks. exactly what i needed. i called and they have a complete head package for the J32 for $799, its a little on the expenensive side but they have it. Thanks again


799 expensive? not really. let us know how it works out
RAvi621
08-13-2009, 11:10 PM
well it was more than i wanted to spend but i will order the parts anyway. i do it now i might as well do it good
paton
08-14-2009, 12:27 AM
I don't understand. How did you manage to bend your valves while being stupid and doing a burnout?
RAvi621
08-14-2009, 09:24 PM
well...the car is supercharged and un-tuned. i was doing a burnout and first gear spun out sooo fast and then second spun right out and i delayed when going into third and thats when it went. I am assuming the car just over revved and the un-tune made it possible. Here is a vid of an older burn out when my cuz borrowed the car, nothing fancy but something to share.


http://www.youtube.com/watch?v=G9l71l1jL-g
heyy
08-31-2009, 05:02 PM
Supertech has head packages floating around now... just in time
http://www.j32a.com/showthread.php?t=185
http://tl.acurazine.com/forums/showthread.php?t=740202