need some cl manual parts

[acidbath124]

does anybody have any spare parts off the manual engine such as the cam gear , crank gear, tdc sensors, etc. basically the stuff thats different between the auto and manual engine so i can use my manual harness and ecu with the engine i have that came out of an auto car. any help would be much appreciated

[jdmjohn]

i have everything you need, i have a complete 03 cl-s long block that got damaged in shipping. just let me know what all need.

[Becoming]

i have everything you need, i have a complete 03 cl-s long block that got damaged in shipping. just let me know what all need.

He needs the Front cam pulley, Front plate assembly (behind cam pulley),Timing belt pulley(lower), Crank shaft sensor, Sub harness for CKP, TDC Sensors {2 of them}, TDC SUB HARNESS...let us know if you have them that ain't broke.

[acidbath124]

also it has to be from an engine that was in a manual vehicle. so if the motor you have came out of a manual car then i need the parts "becoming" listed.that would be a big help thanks

[jdmjohn]

Front cam pulley<--- i have, Front plate assembly (behind cam pulley)<-------i have,Timing belt pulley(lower)<----- i have, Crank shaft sensor<---i have but where is it located, Sub harness for CKP<----i have but where is it located, TDC Sensors {2 of them}<------i have but where is it located, TDC SUB HARNESS<----i have but where is it located. the motor i have is from a 03 cl-s 6speed. the block was broken right behind the water pump. so the company sent me another cl-s 6 speed. so i have a complete long block for parts. just let me know where the sensors are. cuz i thought the crank sensor was located on the trans bell houseing

[acidbath124]

the ckp sensor around the oil pump and i believe it has a three wire plug with it. the tdc sensors are around the front cam gear and shud be a six wire plug with them.if you want to pm your phone number it would be easier to explain. but that is the stuff i need

[jdmjohn]

acidbath124 did you get my PM?